SMOK Nord 4 Replacement Pod

Description

The Smok Nord 4 Replacement Pods are the official refillable pods built exclusively for the Smok Nord 4 kit — no cross-device compatibility here. Two variants exist: the RPM pod, which takes the full RPM coil range, and the RPM2 pod, designed for RPM2 coils only. Both pods look near-identical, so check the label printed on the fill bung before ordering. Each pack contains three pods. At a TPD compliant 2ml capacity, they’re ready to fill with your preferred nic salt or freebase e-liquid straight out of the box. PCTG construction keeps them lightweight, and the side-fill port makes refilling a clean, fuss-free process. Key Features 2ml TPD Compliant Capacity — Meets UK regulations; works with both freebase and nic salt e-liquids PCTG Construction — Durable, lightweight material that handles daily e-liquid cycling without degrading quickly Side-Fill Silicone Stopper — Pull the bung, fill, press it back. Straightforward and leak-resistant when sealed correctly Bottom Press-Fit Coil Install — Coil drops in from the base and clicks into place; no threading required Dual Coil Series Support — RPM pod covers MTL vaping through to RDL ; RPM2 pod suits sub-ohm and MTL mesh coil users Core Advantages One Pod, Multiple Coil Options The press-fit base accepts every coil in the RPM or RPM2 range — from tight MTL mesh coils at 0.4Ω right up to the 0.16Ω mesh for sub-ohm sessions. When your coil burns out, you swap the coil, not the pod. That keeps your ongoing cost down without compromising the vape. Practical Flavour Rotation Keep two or three pods loaded with different e-liquids — menthol in one, tobacco in another. Each pod retains its own coil and flavour profile, so there’s no cross-contamination between sessions. Vapers who switch flavours throughout the day find this setup genuinely useful. Sensible Leak Prevention The silicone stopper creates a solid seal when pressed in flush. Fill to just below the brim, reseat the bung firmly, and you’ll avoid the gurgling and leaking that overfilled pods cause. The PCTG shell holds up well to regular coil swaps and daily handling. E-Liquid Guide Nic Salts (MTL) — Spot on with the RPM 0.3Ω MTL mesh coil or RPM2 0.6Ω MTL coil . Use 10–20mg strength at a 50/50 or 60/40 VG/PG ratio for a smooth, satisfying draw. Freebase Nicotine (RDL/MTL) — The RPM 0.4Ω mesh coil at 25W handles this well. A 50/50 blend gives a decent throat hit without flooding the coil. High VG 70/30 (DTL) — Pair with the RPM2 0.16Ω for cloud-heavier sessions. Keep VG at 70% or above to match the coil’s wicking speed. Avoid thin e-liquids (below 50/50 PG/VG) in higher-wattage DTL coils — they tend to over-saturate and cause gurgling. How To Use Filling the Pod Pull the pod out from the top of the Nord 4 device Locate the side-fill port and gently pull out the silicone stopper Insert your e-liquid nozzle and fill to just below the maximum line Press the stopper firmly back in until it’s flush with the pod wall Wait 2–3 minutes before vaping to let the coil wick fully Changing the Coil Remove the pod from the device Grip the coil at the base and pull it out firmly downward Take your new coil and press it into the base of the pod until it clicks Add 2–3 drops of e-liquid directly onto the coil head to prime it Fill the pod, reseal, and wait a few minutes before firing FAQs Are these pods compatible with any other Smok devices? No — these pods fit the Smok Nord 4 kit only. They won’t connect or function correctly in the Nord 2, Nord X, Nord C, or any other Smok device. If you’re unsure which device you have, check the label on the underside of the mod. What’s the difference between the RPM and RPM2 pods? Both look near-identical but take different replaceable coil series. The RPM pod accepts RPM coils (0.3Ω–1.2Ω range); the RPM2 pod is for RPM2 coils only (0.16Ω, 0.25Ω, 0.6Ω). The fill bung is labelled — check it before swapping coils. My pod is leaking — what’s the fix? Most leaks come from an overfilled pod or a loose silicone stopper. Fill to just below the max line and ensure the bung is pressed fully flush. If the stopper looks cracked or worn, the pod needs replacing — a damaged bung won’t hold a seal. How long do the pods last before I need to replace them? The pods themselves last considerably longer than the coils — some vapers report getting six months or more from a single pod with regular coil swaps. Replace when the silicone stopper shows wear, the pod shell cracks, or you notice persistent leaking that a new coil doesn’t fix. Do coils come included with these pods? No — these are empty replacement pods only. You’ll need to purchase RPM coils or RPM2 coils separately, depending on which pod variant you’ve ordered.