Description
The Dotmod dotBox 220W V2 Blue Engraved Tortank Limited Edition Mod combines the powerful performance of the dotBox V2 with a detailed blue Blastoise-inspired engraved finish. Designed for experienced vapers and collectors, it offers an adjustable output of 5W to 220W, seven operating modes and compatibility with standard 510 vape tanks and rebuildable atomisers. The bright blue aluminium chassis features intricate Tortank artwork inspired by the iconic water-type turtle character. This gives the device a bold, collectable appearance while retaining the lightweight construction, comfortable shape and advanced performance of the standard dotBox 220W V2. This is the mod-only version, so no tank or batteries are included. It requires two high-drain 18650 batteries and is best suited to users who understand external battery safety, coil resistance and wattage selection. Introducing the Dotmod dotBox 220W V2 Tortank Limited Edition Mod The Dotmod dotBox 220W V2 Blue Engraved Tortank Limited Edition Mod is built around a lightweight aluminium chassis with detailed engraved artwork across the exterior panels. The blue finish complements the water-themed Tortank and Blastoise-inspired design, creating a distinctive alternative to the standard dotBox colour options. The engraving does not affect the controls or performance, so users still receive the full power range and advanced chipset features of the dotBox 220W V2. A crisp 1.08-inch full-colour display clearly presents your selected wattage, coil resistance, battery levels and operating mode. The screen and interface can also be customised through the device menu. A dedicated physical lock switch allows the entire device to be quickly disabled before it is placed in a pocket, bag or storage case, helping to prevent accidental firing. Dotmod dotBox 220W V2 Tortank Mod Features Tortank limited-edition design: Detailed Blastoise-inspired engraving across a bright blue aluminium chassis Device type: Standalone regulated box mod with no tank included Power output: Adjustable from 5W to 220W Battery configuration: Requires 2 x high-drain 18650 batteries Operating modes: Power, Bypass, Nickel TC, Titanium TC, Stainless Steel TC, Curve and Boost Display: 1.08-inch full-colour screen Connection: Standard centred 510 connection Recommended tank size: Atomisers measuring up to approximately 25mm provide the cleanest fit Construction: Lightweight aluminium alloy body Device controls: Dedicated full-device lock switch Charging: USB-C charging connection Resistance range: Approximately 0.08 to 3.0 ohm Safety features: Short-circuit protection, resistance warnings and a 10-second firing cut-off Blue Engraved Tortank and Blastoise-Inspired Design This limited-edition dotBox features a detailed Tortank engraving across its blue aluminium body. Tortank is the French name commonly used for Blastoise, making this edition particularly appealing to collectors and fans of the recognisable water-powered turtle design. The engraved artwork covers the exterior panels without interfering with the screen, fire button, adjustment controls, battery compartment or physical locking switch. The blue colourway suits the water-themed design and gives the mod a more vibrant appearance than the standard dotBox 220W V2 finishes. Unless licensing has been confirmed by the supplier, this product should not be described as an official Pokémon collaboration or an officially licensed Blastoise product. Dotmod dotBox 220W V2 Tortank Performance With an adjustable output of 5W to 220W, the dotBox V2 supports a wide range of tanks, coils and vaping styles. It can power everything from moderate-wattage RDL tanks to demanding sub-ohm tanks and rebuildable atomisers. Always use the recommended wattage range printed on your installed coil. Begin at the lower end of the range and gradually increase the power until you reach your preferred balance of flavour, warmth and vapour production. Power Mode Power mode provides straightforward adjustable-wattage vaping. This will be the most suitable mode for most standard sub-ohm tanks and pre-built vape coils. Boost Mode Boost mode increases the initial power delivered when the fire button is pressed. This can help larger coils heat more quickly and provide a stronger initial response. Curve Mode Curve mode lets you customise how the wattage changes throughout each puff. It can be used to create a faster initial ramp-up or a smoother, more gradual heating profile. Temperature Control Modes Nickel, titanium and stainless steel temperature-control modes regulate the temperature of compatible coil wire. These settings should only be used with the corresponding supported wire material. Bypass Mode Bypass mode produces an output based on the current voltage of the installed batteries. This creates a more direct style of power delivery while continuing to operate through the mod’s chipset and built-in protection systems. Tank and Atomiser Compatibility The Dotmod dotBox 220W V2 Tortank Limited Edition Mod uses a standard centred 510 connection and works with most compatible vape tanks, RDAs and RTAs. Atomisers measuring approximately 25mm wide will provide the cleanest fit on top of the device without noticeable overhang. You can pair the device with a compatible Dotmod tank or browse our wider collections: Sub-ohm vape tanks Rebuildable atomisers Box mods Dotmod vape hardware The mod can technically be used with MTL, RDL and DTL tanks, provided the installed coil falls within the supported resistance and wattage range. However, its dual-battery configuration and larger chassis make it most naturally suited to experienced RDL and DTL users. Choosing the Right Wattage and E-Liquid The correct wattage depends on the coil installed in your tank rather than the maximum output of the mod. MTL coils: Use the lower wattage stated by the manufacturer and pair them with a compatible 50/50 e-liquid. RDL coils: Usually operate at moderate wattages and can work with 5
