Description
Geekvape Aegis Legend 3 Kit (L200): 200W with a Palm-Sensing Smart Lock The Geekvape Aegis Legend 3 , also sold as the L200 Legend 3, is the Legend with GeekVape’s Smart Lock – a sensor on the back that unlocks the mod when your palm covers it – and the first with its Memory mode. Around them sits a 200W dual-18650 box mod with the AS Chip 4.0, six working modes, a 0.96-inch colour screen, 5V/3A fast charging and an IP68 rating. The UK kit includes a 2ml Z Fli tank with a flip-top cap and two Z XM coils. It sits between the Geekvape L200 (Aegis Legend 2) kit and the newer Aegis Legend 5 , and plenty of our customers still choose it for the palm lock. Below: the spec sheet, the three lock settings, the modes, the coils GeekVape lists for it, batteries and a Legend 2 vs 3 vs 5 comparison. The Aegis Legend 3 in all ten colours. 🔌 Geekvape Aegis Legend 3 at a Glance ✔ 200W from two 18650 batteries (not included) ✔ Smart Lock palm sensor, three lock settings ✔ Six modes including Memory (five saved set-ups) ✔ AS Chip 4.0 with steady buck-boost output ✔ 0.96-inch TFT colour screen ✔ Type-C fast charging, 5V/3A ✔ IP68 water, dust and shock resistance ✔ 2ml Z Fli tank with flip-top cap Geekvape Aegis Legend 3 Specifications From GeekVape’s own listing for the Legend 3 kit: Specification Aegis Legend 3 Batteries Two external 18650 (7.4V), not included; flat-ended cells Charging Type-C, 5V/3A Output 5–200W; 45A and 12V maximum Resistance range 0.1–3Ω Modes Power, TCR, Eco, Smart, Boosting, Memory Screen 0.96-inch TFT colour Lock Smart Lock: Touch Lock, Button Lock or Unlock Mode Tank 2ml Z Fli, flip-top cap, top airflow Coils in the box Z0.15 XM (70–85W, fitted), Z0.4 XM (50–60W, spare) Size 55.36 x 140.5mm (W x H) White Vape Co recommends: the pre-fitted Z0.15 XM is a cloud coil. For more flavour and a pair of batteries that lasts longer, swap to the Z0.4 XM spare and start it at 50W. And set up Memory mode early: save one low-watt flavour setting and one high-watt cloud setting, and you can switch between them with a click. Power, Smart and Boosting screens on the Legend 3. Which Coils and Tanks Fit the Aegis Legend 3? GeekVape lists six Z Series coils for the Legend 3 kit, and its 510 connection takes other Z tanks as well. Both coils in the box are Geekvape Z XM coils – the Z0.15 XM at 70–85W and the Z0.4 XM at 50–60W. GeekVape’s chart for the Legend 3 also lists the standard Geekvape Z coils : Z0.15 (80–90W), Z0.2 (70–80W), Z0.25 (45–57W) and Z0.4 (50–60W). A second Geekvape Z Fli tank is sold on its own if you like to run two flavours. If you’d rather not have a flip-top, the Z Sub-Ohm Tank 5 and the child-lock Z Sub-Ohm SE tank take the same Z coils. Will not fit: B Series coils, which are for pod cartridges such as the Aegis Hero. GeekVape’s Z coil chart for the Legend 3. Setting Up the Legend 3 and Its Smart Lock Fit two charged, flat-ended 18650s. Button tops can stop the battery door closing. Flip open the Z Fli cap, fill the tank, click the cap shut and let a new coil soak for 3–5 minutes. Pick a lock setting. Touch Lock (the default) unlocks when your palm covers the sensor on the back; Button Lock stops stray touches changing your settings while the fire button still works; Unlock Mode frees every button, handy with gloves on. Choose a mode: Smart matches the power to your Z coil, or set your own watts in Power mode. Save favourite set-ups in Memory mode – up to five, recalled with one click. Legend 3 Batteries and Charging Two external 18650s power the Legend 3, and it charges them in the mod over Type-C at up to 5V/3A, fast for a dual-battery mod. If you vape at high wattage all day, keep a spare pair on an external charger and swap. Use matched high-drain cells, bought and used together, and check the wraps now and then – a nicked wrap is a reason to replace a cell. The AS Chip 4.0’s buck-boost output keeps the power steady as the batteries run down, so the last puffs taste like the first. Aegis Legend 3 Troubleshooting Problem Likely cause and fix Won’t fire when I pick it up Touch Lock needs bare skin over the sensor. Wearing gloves? Switch to Unlock Mode. Settings keep changing in my pocket Use Button Lock, which locks the adjustment buttons. Z Fli cap opening Make sure the flip-top clicks fully shut after filling. Can’t reach high watts Smart mode keeps the power within the coil’s range. Use Power mode to set it yourself. Burnt taste Prime a new coil for 3–5 minutes and start at the low end of its range. Aegis Legend 2 vs Legend 3 vs Legend 5 Legend 2 (L200) Legend 3 Legend 5 Output 5–200W 5–200W 5–200W Screen 1.08-inch 0.96-inch 1.08-inch Lock A-Lock Smart Lock palm sensor A-Lock Memory mode No Yes, five set-ups No UK tank 2ml Z Sub-ohm 2021 2ml Z Fli 2ml Z sub-ohm Size (W x H) 54.12 x 140.05mm 55.36 x 140.5mm 56 x 146mm All three run two 18650s, carry IP68 and take Z coils. Prefer a bigger screen and light strips? See the Geekvape Aegis Legend 5 kit . Aegis Legend 3 Colours GeekVape made the Legend 3 in ten colours: Titanium Gray, Black, Red, Golden Blue, Purple, Dark Gray, Rainbow, Silver, Blue and Green. We currently have Golden Blue and Silver; the colour options above show live stock. Already have a tank you love? We also sell the Aegis Legend 3 mod on its own . What’s in the Box The Aegis Legend 3 mod (no batteries), a 2ml Z Fli tank, two Z XM coils (Z0.15 XM fitted, Z0.4 XM spare), a spare glass tube, a spare parts pack, a Type-C cable and a user manual. Best E-Liquids for the Aegis Legend 3 The Legend 3 is built for direct-to-lung vaping, so use high-VG shortfill e-liquids at 3mg or 6mg – add a nic shot to a shortfill to get there. Nic salts are too strong at sub-ohm wattages; our nic salts vs freebase guide explains the difference. Buy the Aegis Legend 3 Near You Need the Geekvape Aegis Legend 3 today? Our Totton vape shop , Hythe vape shop and Holbury vape shop stock replacement pods, coils and kits, and the team can check which resistance suits your device and e-li
