Geekvape B Series Coils – 5 pack

Description

Geekvape B Series Coils for the Aegis Hero 5 and Aegis Boost Plus Geekvape B Series coils are the replaceable mesh coils for GeekVape’s Aegis Hero and Aegis Boost pod mods, five to a pack. We stock the 0.2Ω, 0.4Ω and 0.6Ω, which between them run from a restricted lung hit down to about 15W. GeekVape sells the B coil in two versions – the original B Series and the newer Boost Version – and says they share the same interface, so either fits any device that takes a B coil. What changes from device to device is which resistances it can power. A Geekvape B Series coil: the head used across the Aegis Hero and Aegis Boost ranges. 🔌 Geekvape B Series Coils at a Glance ✔ Five coils per pack ✔ 0.2Ω, 0.4Ω and 0.6Ω ✔ KA1 kanthal mesh ✔ From 15W up to 58W ✔ Push-fit into the cartridge or pod ✔ Aegis Hero 5, Boost Plus and more B Series Coil Resistances and Wattage GeekVape’s ratings for the three B coils we stock. It also makes a 0.3Ω (30–38W) and MTL versions, which we don’t currently list. Resistance Wattage Draw E-liquid (GeekVape) 0.2Ω 50–58W Direct to lung Freebase, 3mg or less 0.4Ω 25–35W Restricted lung (RDL) Freebase 3mg or less, or nic salts 0.6Ω 15–25W RDL, leaning MTL Freebase 3mg or less, or nic salts White Vape Co recommends: the 0.4Ω is the one most Hero 5 owners live on: it fires in every B-coil device, suits nic salts as well as freebase, and at 25–35W it doesn’t drain the battery. Pick the 0.6Ω for a tighter, lower-power vape with 10mg or 20mg salts, and the 0.2Ω only on a device that reaches 50W – with 3mg freebase. GeekVape’s coil chart: the B Series row lists the Aegis Boost, Boost Plus, Aegis Hero and H45. Which Devices Take Geekvape B Series Coils? GeekVape lists B coils for the Aegis Hero cartridge (Hero 5, Hero 2 / H45), the Boost and Boost Plus pods, the B60 (Boost 2 and Boost 3) pod, the Aegis Force cartridge and the Z Nano 2 and Z Nano 3 tanks. The Geekvape Aegis Hero 5 Pod Kit ships with B coils – GeekVape puts a B0.4 and a B0.2 Boost Version in the box – and supports every B resistance from 0.2Ω up, at up to 50W. Its spare cartridge is the Geekvape Aegis Hero 5 empty cartridge , which comes without a coil, so fit one of these. The same goes for the kit in our Aegis Hero 5 bundle deal . For the Geekvape Aegis Boost Plus pod , GeekVape lists the B0.4 (25–35W) and B0.6 (15–25W), so use those two in it rather than the 0.2Ω. Will not fit: the Geekvape Aegis replacement pod cartridges – the Aegis Pod uses the G Series coil (see our Geekvape G coil KA1 1.2Ω ). B coils also aren’t listed for the Aegis Boost Pro or B100 pods. How to Fit and Prime a Geekvape B Series Coil Take the pod or cartridge off the device and pull the old coil out. Wet the cotton through the side window of the new coil, then push it firmly home – GeekVape stresses that it must seat fully. Fill, refit and let it stand for three to five minutes. Set the airflow for the coil: GeekVape says at least two-thirds open for the 0.2Ω and no more than one-third for the RDL coils. Start at the bottom of the wattage band. How Long Does a Geekvape B Series Coil Last? GeekVape’s answer for the B Series is typically one to two weeks, depending on how much you vape, and it says the newer Boost Version lasts about twice as long. The 0.2Ω at 58W wears quickest; the 0.6Ω on nic salts usually goes longest. Sweet liquids shorten any coil’s life. B Series Coil Troubleshooting Problem Likely cause and fix 0.2Ω tastes burnt in a Boost Plus GeekVape lists the Boost Plus for the 0.4 and 0.6 only. Use one of those. Gurgling from the pod Airflow too tight for the coil, or it flooded when primed. Open the airflow a notch and flick the pod into a tissue. Leaking at the base of the pod The coil isn’t pushed fully in. Take it out and reseat it. Best E-Liquids for B Series Coils With the 0.4Ω or 0.6Ω, 10mg or 20mg nic salts work well, as do 50/50 freebase e-liquids . The 0.2Ω is a lung coil: GeekVape recommends freebase at 3mg or less, so a shortfill with a single nic shot is the match. Not sure which nicotine type suits you? Read nic salts vs freebase . Buy B Series Coils Near You Need B Series coils today? Our Totton vape shop , Hythe vape shop and Holbury vape shop stock GeekVape coils, tanks and kits, and the team can check which resistance suits your device and e-liquid. We can set up your Aegis Hero 5 or Boost Plus with the right resistance. Stock varies by store, so give us a call before you travel. Ordering online instead? See our delivery options . You May Also Like Aegis Hero 5 review and guide Geekvape G Coil KA1 1.2 Ohm Geekvape Z XM Coils All GeekVape products Replacement vape coils Frequently Asked Questions Are Boost Version B coils compatible with the old B Series? Yes. GeekVape says both versions share the same interface: any device that takes a B coil takes the Boost Version, which it rates at about twice the life. Do B Series coils fit the Aegis Hero 5? Yes – the Hero 5 ships with B coils, and it runs every resistance from 0.2Ω up. Can I use the 0.2 ohm B coil in the Aegis Boost Plus? GeekVape lists the Boost Plus for the 0.4Ω and 0.6Ω only, so stick with those. How many coils are in a pack? Five.